Uni-Trend UT201 Specifications download pdf (Page 16)

Measurement Operation(2)

l When DC voltage measurement has been completed,

disconnect the connection between the testing leads

and the circuit under test and remove testing leads

from the input terminals.

B. AC Voltage Measurement (see figure 4)

red black

( figure 4)

Warning

To avoid harms to you or damages to the Meter from

eletric shock, do not attempt to measure voltages

higher than 600V AC/DC, although readings may be

obtained.

The AC Voltage ranges are:

2.000V, 20.00V, 200.0V and 600V.

To measure AC voltage, connect the Meter as follows:

1. Insert the red test lead into the VΩ terminal

and the black test lead into the COM terminal.

2. Set the rotary switch to V

3. Connect the test leads across with the object being

measured.

The measured value shows on the display.

Model UT201/202: OPERATING MANUAL

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Uni-Trend UT201 Specifications Page 16